Mine Crypto with 6 GPUs on the MSI Z270

MSI Z270-A Pro Motherboard Bios Settings for mining crypto with 6 gpus.

MSI Z270a Pro: http://amzn.to/2umU3Rk

My ETH Wallet: 0x916a3833606e67a2b072cf58539c2ed06cde6e8e
My BTC Wallet:

MSI Pro Series Z270a: http://amzn.to/2sHVqNX
Intel Pentium G4400: http://amzn.to/2tKvsJu
Killawatt: http://amzn.to/2sOxNP8
Crucial Value Ram: http://amzn.to/2tKtAjQ
Corsair HX1200i: http://amzn.to/2tNXqng

Benchmark Charts Early on Patreon: https://www.patreon.com/sonofatech

Amazon Affiliate Link
  • Steven Urbina

    hi. i would like that help me with this : i have an issue with msi afterburner monitor. all, but all shows at 0. i have uninstalled and installed several times this program and at the same that video drivers but always shows nothing monitoring. so my question is if the rayzen 3 2200g (my cpu) is considering like cpu or gpu for the msi afterburner. thank you a lot

  • Stewart Katz

    I have a 6GPU Mining rig. Consists of MSI Z270-A Pro mother board and 6 x Sapphire Radeon RX580 8GB Pulse with Micron memory.In the large PCI slot that is closest to the CPU, all cards, when tested individually, can get 31mh/s. When I use all the GPUs, (in the other large PCI slot & the 3 small PCI slots), only one of the GPUs (the one in the large PCI closest to the CPU) will get 31mh/s, while the others will get only 21mh/s.I am not sure if I need to change a setting in the motherboard or reflash the bios on the GPUs?It did the same prior with the original bios on the GPUs. (I was getting 27 & 18 mh/s respectively)Any suggestions? can anyone shed some light? I have googled this problem to no avail.Thanks in advance

  • Jason Todosijevic

    great vid man! i used this guide when i bought mine!

  • DukeDukeCity

    I accidentally changed IGD Multi-monitor to enabled and now can't get any display, any ideas?

  • BusTV Chan

    I have a z370 gaming and my graphics card except the primary all give me code 43 in device manager pissing me off

  • Pamela Willis

    I have the MSI Z270 SLI and my bios is in chinese and font is very large. I am not able reninstall because of the large fonts. any ideas what I can do?

  • md shoziv

    I have msi z270 pro series motherboard,if im setup gpu then after not open the display , and hanging,, 8GB RAM,, 60GB hard dick,,,

  • Cem Mehmet AYATA

    Msi mother board is a big shit. I have the z270 pro carbon. I just sent to the carbage and bought an asus motherboard which works perfect!

  • Keith Halles

    I finally got this stupid motherboard to work: first I installed the latest bios from msi, then all I did was install a fresh copy of windows home, connected only one GPU, installed the latest drivers from Nvidia, then installed the GPU one by one rebooting after every GPU making sure the system detects it. After the 3rd GPU I went into the bios: PEG0=Gen2, PCI latency=96, 4G=enabled, integrated graphics=PEG. I restarted, plugged the monitor into the GPU that's in a x16 slot, continued to put 4,5 & 6th GPU every time rebooting after connecting a card.... Hehehe

  • Zhora Hovhannisyan

    Z270-A PRO - E7A71IMS.120 bios plisssss

  • Victor Contreras

    "Whats up son!"

  • Steven Wildman

    Im setting up my bios but cant save settings because no SSD? Im setting my rig up to run off a usb drive with SMOS. I didnt think I would need an SSD. How can I get this saved or do I need an SSD on the motherboard?

  • Seaquel07

    I can't get the miner to recognise the 6th GPU, it is showing up on the GPU-Z so would I be correct in assuming it's a problem with the miner?

  • NikolaM2011

    Had a problem with 5th card did everything like you explained and look at the surprise everything is working just fine! 6x1080 gigabyte g1, sp ssd m. 2., sp ram 4gb, intel g3930. Again thanks for video!

  • Amoy Bisaya

    Does SMOS work with this mobo?

  • Pascal Nieuwhof

    I only get 5 GPU working, the 6th (in pci_e4) is not working. Can anyone help me with this?

  • chrisreilly85

    PSA!!! Go to Settings\Advanced\Windows OS Configuration and Enable Windows 8.1/10 WHQL Support. This finally did it for me after three straight days of troubleshooting and messing with all the other settings in this video one by one and rage quitting several times (expand comment for my notes and settings).Note, when you enable the Windows10 support, a few other BIOS changes take place automatically as well. I went back and manually changed them back to what they were so that the only change was the Windows10. I'm not sure if this step is necessary.FIRST THOUGH, I would:Unplug all GPUs and install Windows firstInstall the GPU drivers (either online if you can connect to the internet or via USB)Then add each GPU one by one, shut down and repeatMy other BIOS settings:PEG0 - AutoPCI Latency - 32Above 4G - EnabledHD Audio - Disabled (not sure if this does anything)IGD - EnabledRestore after power loss - EnabledPC now recognizes all 6 GPUs. I will edit any of the above settings if the mining itself is unstable (can't connect to the web to test yet; separate issue).


    • 2 x PCIe 3.0 x16 slots (supports x16/x4 mode)*• 4 x PCIe 3.0 x1 slots* The PCI_E4 slot will be unavailable when an M.2 SSD module has been installed in the M.2_2 slot.** The PCI_E2 slot will be unavailable when an expansion card has been installed in the PCI_E5 slot.** The PCI_E3 slot will be unavailable when an expansion card has been installed in the PCI_E6 slot.

  • joan ramos

    I have a MSI Z170 Gaming M5 I was using 4 GPU and I get 2 more but windows isn’t booting after enabling above 4G how can I fix the problem??

  • Jehuty

    Can't get more then 2 gpu's detected plz help

  • Igor Cássio

    Son... i change for gen 1... u save my life! It's works now... thanks

  • Jansen Salazar

    Hi...i have the same motherboard..with I5..i followed all the BIOS config you mentioned and i updated the BIOS to the latest version. It only recognize 3 gpu..im using evga 1050 ti. i tried using different risers...i have 2 connecting psu. is there any more config i can do so it will recognize more than 3 gpu? when i check the device manager it recognize 3 gpu plu the intel HD..tried disable it and still does not read the 4th gpu. what else can i do? thanks for the help. more power to you channel

Asus Z270 A Bios Settings (Cryptocurrency Mining)
Biggest Misconception About Mining With Nicehash
Mining Pool Shares, Difficulty and Luck Explained
Tips for using PCIe Powered Risers
Asrock H110 Pro BTC+ 13 GPU Mining Motherboard CryptoCurrency Unboxing
Should You Build A Mining Rig in 2018?
5 Things I Learned While Building an Ethereum Mining Rig
SMOS |SImple Mining| vs Hive OS
How and Why To Mine Raven Coin $RVN |Nvidia|
BBT Livestream21: Building a Ethereum Mining Rig Start to Finish! 6x GTX 1060
Put a Desktop GPU in a LAPTOP… The CHEAP WAY!
© 2019 Как начать — Майнинг monero, dash на nvidia как начать заниматься майнингом? Все материалы, размещенные на сайте cauchy.mobi, взяты из открытых источников (yandex.ru, google.com, youtube.com и прочих общедоступных ресурсов), принадлежат их владельцам и предоставляются исключительно в ознакомительных целях.